Creating a ShopMill program
7.17 Example, standard machining
Outside contour of the island
262
1.
Press the "Contour milling", "Contour" and "New contour" softkeys.
The "New Contour" input window opens.
2.
Enter the contour name (in this case: Part_4_island).
The contour calculated as NC code is written as internal subprogram
between a start and an end marker containing the entered name.
3.
Press the "Accept" softkey.
The "Starting point" input window opens.
4.
Enter the starting point of the contour.
X
90abs
5.
Press the "Accept" softkey.
6.
Enter the following contour elements and acknowledge using the
"Accept" softkey.
6.1.
X
25abs
6.2.
Y
115abs
6.3.
X
15abs
6.4.
Y
155abs
6.5.
X
60abs
6.6.
Y
135abs
7.
Direction of rotation
8.
R
25
9.1
Y
155abs
Y
25abs
FS
15
R
20
Y
135abs
R
10
R
15
X
110abs
R
15
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling