Editing Block Properties - Siemens SINUMERIK 840D sl Operating Manual

Ladder Viewer and Ladder add-on (828D only)

20.11 Editing block properties

20.11 Editing block properties
You can edit the title, author and comments of an INT block.
Note
You cannot edit the block name, interrupt number and data class assignment.
Procedure
624
4. Enter the name of the author, number of the INT block and, if required,
a comment.
The data class of the block is specified.
5. Press the "OK" softkey to transfer the block to the list.
1. The ladder diagram display is opened.
2. Select the relevant block and press the "Program block" softkey.
3. Press the "Properties" softkey.
The "Properties" window appears.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling