Siemens SINUMERIK 840D sl Operating Manual page 105

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Operating Manual, 09/2011, 6FC5398-7CP40-2BA0

Select the "Machine" operating area and press the <JOG> key.

Press the "Workpiece zero" and "Align plane" softkeys.

The "Align plane" window opens.

Select "Measuring only" if you only want to display the measured

Select the desired work offset in which you want to store the zero point

(e.g. basis reference).

Press the "Select WO" softkey and select the work offset in which the

zero point is to be saved in the "Work Offset – G54 ... G599" window

and press the "In manual" softkey.

You return to the appropriate measurement window.

You return to the "Align plane" window.

The selection of work offsets can differ.

Please refer to the machine manufacturer's specifications.

Traverse the tool to the first measuring point that you want to

Press the "Save P1" softkey.

Setting up the machine

2.6 Measuring the workpiece zero

Sinumerik 828d