13.4.5
Storing any new file
In each directory or subdirectory you can create a file in any format that you specify.
This does not apply to the NC memory. Here you can create the following file types under a
workpiece using the "Any" softkey.
Procedure
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder,
in which you would like to create the file.
3.
Press the "New" and "Any" softkeys.
The "Any new program" window appears
4.
Select a file type from the "Type" selection field (for example,
"Definitions GUD") and enter the name of the file to be created when
you have selected a workpiece directory in the NC memory.
The file automatically has the selected file format.
- OR -
Enter a name and file format for the file to be created (e.g. My_Text.txt).
13.4 Creating a directory/program/job list/program list
Program management
549