Tool management
12.5 Tool list
Icon/
Marking
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Displaying tool details (Page 535)
Changing a tool type (Page 536)
514
1.
Select the "Parameter" operating area.
2.
Press the "Tool list" softkey.
The "Tool list" window is opened.
Meaning
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
Milling