Siemens SINUMERIK 840D sl Operating Manual page 259

2. Rectangular spigots, face milling
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
ZI
RP
SC
Machining direction
Retraction position pattern
2. Press the "Accept" softkey.
The work plan is displayed. Program header and end of program are
created as program blocks.
The end of program is automatically defined.
1. Press the "Milling" and "Face milling" softkeys.
2. Enter the following technology parameters:
T FACING TOOL
3. Enter the following parameters:
Machining
Direction
X0
Y0
Z0
X1
Y1
Z1
DXY
DZ
UZ
4. Press the "Accept" softkey.
Creating a ShopMill program
7.17 Example, standard machining
-20abs
100
1
Climbing
Optimized
D1 F 0.1 mm/tooth
Roughing (∇)
-2,5abs
-2,5abs
1abs
185abs
185abs
0abs
80%
2,0
0
V 750 m/min
259