Creating A New Block - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

20.10

Creating a new block

Create INT blocks i you wish to make changes with the PLC user program.
Name
Author
Number of the
interrupt program
Data class
Comment
Note
Access protection
You have the option of protecting blocks that have been newly created against being
accessed.
Procedure
...
Milling
Operating Manual, 09/2011, 6FC5398-7CP40-2BA0
6.
Press the "Attach line" softkey if you want to add a further variable and
enter the data.
- OR -
Select the relevant variable and press the "Delete line" softkey to
remove the variable from the list.
INT _100, INT_101
The number from the selection field "Number, interrupt program" is
taken for the name of the INT block.
A maximum of 48 characters is permitted.
100
101
Individual
A maximum of 100 lines and 4096 characters are permitted.
1.
The ladder diagram display (LAD) is opened.
2.
Press the "Program block" softkey to open the list of program blocks.
3.
Press the "Add" softkey.
The "Properties" window appears.
Ladder Viewer and Ladder add-on (828D only)
20.10 Creating a new block
623

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d

Table of Contents