Installer Menu - Bosch D9412GV4 Installation And System Reference Manual

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.

18.0 Installer Menu

D9412GV4/D7412GV4 v2.03 Control Panels do not support the D5200 Programmer. Instead, you can
perform limited programming and diagnostics using a keypad. Programming and diagnostics options
appear on the keypad when you access the Main menu (Installer) option, which includes the Installer
menu. The Main menu (Installer) option becomes available during normal control panel operation only
when you enter your installer passcode and press the [ENTER].
The available options in the Installer menu include:

Program menu

Wireless menu

Diags menu

Srvc Byp menu

Versions
The Installer menu is also available from the Service menu when in Service mode. The Service menu is
a subset of the Main menu (Installer) option. You can use Service mode at any keypad, but the feature
is most useful when you wish to directly connect an Installer keypad to the control panel for keypad
programming at the control panel. Set the Installer keypad to address 0, and then connect it to the
control panel. The, to access Service mode, put the control panel is in stand-by mode by closing the
RESET pin. The keypad shows [Enter Passcode], requesting the installer to enter in the installer
passcode. Enter your installer passcode and press [ENTER]. To return to normal operation, open the
RESET pin.
The Keypad Installer menu, available only with the Installer passcode, includes a series of tools,
including tools for programming and diagnostics. The tools within the Installer menu include:

Program menu. Program several parameters to make your system operational, including phone
number and format, enhanced communication options, primary and backup routes, and
notifications. Refer to [1] Program menu for more detailed information on each programming
option, and to RPS Help or the Control Panels (D9412GV4/D7412GV4 v2.03) Program Entry
Guide (P/N: F01U265459).

Wireless menu. Add, replace, remove, and diagnose points and repeaters. Refer to [2] Wireless
menu for more detailed information on each programming option, and to RPS Help or the
Control Panels (D9412GV4/D7412GV4 v2.03) Program Entry Guide (P/N: F01U265459).

Diags menu. Diagnose point, repeaters, and cellular service. Refer to [3] Diags menu for more
detailed information on each programming option, and to RPS Help or the Control Panels
(D9412GV4/D7412GV4 v2.03) Program Entry Guide (P/N: F01U265459).

Service Bypass menu. View the status of points and remove points from service. Refer to [4]
Serv Byp (Service Bypass) menu.

Versions menu. View the version information for the control panel, encryption, and more. Refer
to [5] Versions menu.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 104