Bosch D9412GV4 Installation And System Reference Manual page 124

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Area On
B91x/B92x keypads Configuration of Area On
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [4] Area Options > [1] Area On menu option. The keypad display
toggles between showing the Area On state and the account number for the selected areas.
3. Press [PREV] and [NEXT] to toggle to the desired area.
4. Press [ENTER] to edit the desired area and then [ENTER] to edit the Area On state for the
selected area.
5. Press [PREV] or [NEXT] to toggle between Yes or No.
6. Press [ENTER] while viewing the desired option to save the programming.
7. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Area On
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [4] Area Options > [1] Area On menu option. The keypad shows the
Area On state for the selected area.
3. Press [PREV]/
4. Press the Edit softkey to edit the Area On state for the selected area.
5. Press the Yes or No.
6. Press the Save softkey.
7. When the keypad shows Parameter Saved, escape from the menu.
Account Number
B91x/B92x keypads Configuration of Account Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [4] Area Options > [2] Account # menu option. The keypad display
toggles between showing the Area State (enabled) and the Account Number (Account #).
3. Press [PREV] and [NEXT] to go to the desired area.
4. Press [ENTER] to edit the area, and then press [NEXT] to go to the account number option.
5. Press [ENTER] to edit the account number for the selected area.
6. Delete existing characters, if necessary, and then enter the new characters. Use [PREV]
or [NEXT] to move to a different byte.
7. Press [ENTER] to save the programming.
8. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Account Number
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [4] Area Options > [2] Account # menu option. The keypad shows
the Area On state for the selected area.
3. Press [PREV]/
4. Press the Account # softkey to view and edit the account number, and then press the Edit
softkey to edit the account number.
5. Delete existing characters, if necessary, and then enter the new characters. Use [PREV]
6. or [NEXT] to move to a different byte.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09
and [NEXT]/ to go to the desired area.
and [NEXT]/ to go to the desired area.
124