Bosch D9412GV4 Installation And System Reference Manual page 113

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Primary Path Device
B91x/B92x keypads Configuration of Primary Path Device
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [3] Routing menu option. The keypad toggles
between showing the current primary and backup setting for the routing path.
3. Press [PREV] or [NEXT] to scroll through the list of route and go to the route you wish to
program.
4. Press [ENTER] to edit the route.
5. Press [ENTER] to edit the primary route. The keypad shows Set Route Device menu.
6. Press [PREV] or [NEXT] to scroll through the list of devices (for path 1) and go to the Path 1
option you wish to select for the current device (for example, Phone 1).
7. Press [ENTER] to select the device. The keypad shows Set Route Path. To keep path 1,
escape from the menu. To change to a different path (2, 3, or 4), continue to Step 8.
8. Delete existing characters, if necessary, and then enter the new phone number.
9. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Primary Path Device
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [3] Routing menu option. The keypad displays the
primary device for the selected route.
3. Press [PREV]/
to program.
4. Press the Edit softkey to edit the routing programming.
5. Press [PREV]/
path 1 option you wish to select for the current device (for example, Phone 1).
6. To keep path 1, escape from the menu. To change to a different path (2, 3, or 4), press the
Edit Path softkey and continue to Step 8.
7. Delete existing characters, if necessary, and then enter the new phone number.
8. Press the Save softkey to save the change.
9. When the keypad shows Parameter Saved, escape from the menu.
Backup Path Device
Keypads show and allow you to select the Backup Path Device only after you select a
Primary Path Device.
B91x/B92x keypads Configuration of Backup Path Device
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [1] Program > [1] Reporting > [3] Routing menu option. The keypad toggles
between showing the current primary and backup setting for the routing path.
3. Press [PREV] or [NEXT] to scroll through the list of route and go to the route you wish to
program.
4. Press [ENTER] to edit the route.
5. Press [NEXT] to go to the option to edit the backup route.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09
or [NEXT]/ to scroll through the list of routes and go to the route you wish
or [NEXT]/ to scroll through the list of devices (for path 1) and go to the
113