Bosch D9412GV4 Installation And System Reference Manual page 25

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 4.0 Installation
.
If there is keypad inactivity for 20 min,
the Service Walk Test ends
automatically. The keypad returns to
idle text.
4.11.1 Program the Control panel
Use RPS or the keypads to program the control
panel. Refer to:

Control Panels (D9412GV4/D7412GV4
v2.03)) Program Entry Guide (P/N:
F01U265459).

Keypad Installer menu

RPS Help
4.11.2 Service Bypass
To facilitate system maintenance for service
personnel, a special point bypass option is
provided through this menu to remove any point
from service. The status of points in Service
Bypass can be viewed through the Service Bypass
Menu. For details in navigation and operation of
this function refer to the Control Panels
(D9412GV4/D7412GV4 v2.03) Program Entry
Guide (P/N: F01U265459).
4.11.3 RF Points and Repeaters
With a B810 wireless receiver, the control panels
can support up to 238 wireless points, 1000 key
fobs, and 8 repeaters within the RADION wireless
portfolio. The RF Points menu provides the tools
necessary to enroll, remove or replace wireless
points. For details in navigation and operation of
these functions refer to the Control Panels
(D9412GV4/D7412GV4 v2.03) Program Entry
Guide (P/N: F01U265459).
With a B820 SDI2 Inovonics Interface Module, the
control panels can support up to 350 RF devices
and up to eight RF Repeater modules. The RF
Points menu provides the tools necessary to
enroll, remove or replace wireless points. For
details in navigation and operation of these
functions refer to the Control Panels
(D9412GV4/D7412GV4 v2.03) Program Entry
Guide (P/N: F01U265459).
Bosch Security Systems, Inc. | 7/16 | F01U265457-09
None of the functions shown in the RF
Points menu or RF Diagnostics apply
to points with ZONEX as the point
source (points associated with the
D8125INV or ISW D8125CW-V2).
4.11.4 RF Diagnostics
With a B810 wireless receiver, or B820 SDI2
Inovonics Interface Module installed, the control
panel can show detailed wireless communication
information for RF points, keyfobs and repeaters.
The RF Diagnostics menu can show real-time
signal strength information for enrolled RF
devices. By monitoring the signal strength of an
individual RF device, the optimal position for
installation can be found.
RF device diagnostic information also includes AC
status, battery status, supervision status, and
tamper status for all supporting devices. For
details in navigation and operation of these
functions refer to the Control Panels
(D9412GV4/D7412GV4 v2.03) Program Entry
Guide (P/N: F01U265459).
25