2] Repeaters > [1] Add Repeater Menu Parameters; 2] Repeaters > [2] Replace Repeater Menu Parameters - Bosch D9412GV4 Installation And System Reference Manual

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
B93x/B94x keypads Configuration of Point RFID removal
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [1] RF Points > [3] Remove Point RFID menu option.
3. Press [PREV]/
remove, or simply enter the point number.
4. Press the Remove softkey to remove the Point RFID. The keypad removes the device and
shows Point RFID Removed.
5. Escape from the menu.
18.2.4 [2] Repeaters > [1] Add Repeater Menu Parameters
In this menu, you can add repeater points.
Add Repeater
B91x/B92x keypads Configuration of Add Repeater
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [2] Repeaters > [1] Add Repeaters menu option.
3. Press [PREV] or [NEXT] to scroll through the list, and go to the repeater number for which you
wish to add a repeater, or simply enter the repeater number.
4. Press [ENTER] to add the device. The keypad instructs you to reset the device.
5. Initiate activity for the desired RADION device per the device instructions, or press the
[RESET] button on an Inovonics device.
6. When the keypad shows Repeater Added, escape from the menu.
B93x/B94x keypads Configuration of Add Repeater
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [2] Repeaters > [1] Add Repeaters menu option.
3. Press [PREV]/
which you wish to add a repeater, or simply enter the repeater number.
4. Press the Enter softkey to add the device to the number. The keypad instructs you to reset
the device.
5. Initiate activity for the desired RADION device per the device instructions, or press the
[RESET] button on an Inovonics device.
6. When the keypad shows Repeater Added, escape from the menu.
18.2.5 [2] Repeaters > [2] Replace Repeater Menu Parameters
In this menu, you can replace repeater points.
Replace Repeater
B91x/B92x keypads Configuration of Replace Repeater
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [2] Repeaters > [2] Replace Repeater menu option.
3. Press [PREV] or [NEXT] to scroll through the list of repeaters, and go to the repeater you wish
to replace, or simply enter the repeater number.
4. Press [ENTER] to replace the device. The keypad instructs you to reset the new device.
5. Initiate activity for the desired RADION device per the device instructions, or press the
[RESET] button on an Inovonics device
Bosch Security Systems, Inc. | 7/16 | F01U265457-09
or [NEXT]/ to scroll through the list, and go to the point you wish to
or [NEXT]/ to scroll through the list, and go to the repeater number for
138