Preparing The Main Machine; Installing The Lct - Ricoh MT-C1 Service Manual

LCT (B473)

Preparing the Main Machine

!
CAUTION
Switch the machine off and unplug the machine before starting the
following procedure.
1. Remove the LCT installation cover
[A] from the right side of the
machine. (" x 2).
2. Save the screw on the left [B]. You
will need it to install the LCT.
3. Remove the LCT connector cover
[C] (x 1) and the covers over the
holes for the docking pins [D]. (x 3)

Installing the LCT

1. Insert the two upper docking pins
(grooved) [A] into the upper slots
and the lower docking pin [B] into
the lower slot.
[D]
[B]
1-28
15 February 2006
[C]
[A]
[B]
B473I003.WMF
[A]
B473I004.WMF