Ricoh MT-C1 Service Manual page 364

15 February 2006
7. Install the new NVRAM. Make sure that the NVRAM is installed the correct way
around.
8. Connect the power cord and switch the machine on.
9. Enter the SP mode and execute SP5801 (Memory All Clear)
10. Execute SP5825 (NVRAM Download) to download the data uploaded from the
old NVRAM.
11. Switch the machine off then on.
12. Execute SP5990 to print another SMC report. Confirm that all the SP settings
have been initialized.
13. Execute SP3001-002 (ID Sensor Initialization) to initialize the ID sensor.
14. Execute SP5907 (Plug & Play) and enter the brand and model name of the
machine for Windows Plug & Play capability.
15. For details about SP initial settings, see "Section 5 Service Tables".
3-135
PCBS AND HDD