Ricoh MT-C1 Service Manual page 596

15 February 2006
6107 Cover Feeder Size Change (B246)
This SP sets the priority paper size setting for the cover interposer tray (B704).
001 Priority (All)
002 EU/CH
003 NA
004 NA
005 NA
006 EU/CH
007 EU/CH
008 EU/CH
6109 Staple Position Adjustment
Use this SP to shift the position of the stapling done by the corner stapler of the
finisher. This SP shifts the staple position forward and back across the direction of
paper feed.
• Use the "•" key to toggle between + and –.
• A larger value shifts the stapling position to shift forward.
• A smaller value shifts the stapling position backward.
The settings are done for each paper size.
[-2 to +2 / 0 / 0.5 mm]
0: A3
1: 12"x18"
0: 8½" x 13"
1: 8½" x 13"
2: 8¼" x 13"
0: 8½" x 14"
1: 8½" x 13"
0: LT LEF
1: 10½" x 7¼"
0: LT SEF
1: 8" x 10"
0: Taiwan 8-Kai
1: DLT
0: Taiwan 16-Kai
1: LT SEF
0: Taiwan 16-Kai
1: LT LEF
5-123
SERVICE PROGRAM MODE TABLES