Ricoh MT-C1 Service Manual page 601

SERVICE PROGRAM MODE TABLES
6122 Z-Fold Position Adjust (B140)
These settings adjust the positions of the first and second folds of paper fed
through the Z-folding unit. The first 8 settings (001-008) adjust the position of the
first fold for the paper sizes listed. The second 8 settings (009-016) adjust the
position of the second fold. The illustration shows the position of the sheet while it
goes through the lower exit rollers after it has been folded.
1st Fold
001 A3
002 B4
003 A4 SEF
004 DLT
005 LG
006 LT SEF
007 12 x 18
008 1st Fold: Other
2nd Fold
009 A3
010 B4
011 A4 SEF
012 DLT
013 LG
014 LT SEF
015 12 x 18
016 Other
[-4~+4/0.2 mm]
Adjusts the position of the first fold [A] to decrease or
increase the distance (
the crease of the 2nd fold [C].
[-4~+4/0.2 mm]
Adjusts the position of the 2nd fold [C] to decrease or
increase the length (L1) of the sheet between the trailing
edge [D] and the 2nd fold.
[D]
[A]
L1
[B]
[C]
B246S911.WMF
5-128
A
) between the leading edge [B] and
A
15 February 2006