Ricoh MT-C1 Service Manual page 573

SERVICE PROGRAM MODE TABLES
5841* Supply Name Setting
Press the User Tools key. These names appear when the user presses the
Inquiry button on the User Tools screen.
001 Toner Name Setting: Black
011 StapleStd1
012 StapleStd2
013 StapleStd3
014 StapleStd4
021 StapleBind1
022 StapleBind2
023 StapleBind3
5842* 001 Net File Analysis Mode Setting
GWWS Analysis Mode Setting (B246) DFU
5842
This settings select the output mode for debugging information as each network file is
processed.
001 Setting 1
002 Setting 2
5844* USB
001 Transfer Rate
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
002 Vendor ID
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000~0xFFFF/1] DFU
003 Product ID
Sets the product ID.
[0x0000~0xFFFF/1] DFU
004 Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
[0000~9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
Enter the name of the toner in use.
Standard Staples
Saddle-Stitch Staples
5-100
15 February 2006
Bit SW 0011 1111