Ricoh MT-C1 Service Manual page 718

Table of Contents

Advertisement

ADF
Changing the Default Selection with SP6016 and SP5126
Here is a list of paper sizes that can be set for the default to enable detection. The
bold sizes are the default settings, and the italic sizes are the alternate settings.
North America
64
DL SEF
32
LT LEF
16
LT SEF
8
LG SEF
To change the default settings:
1. Enter the SP mode.
2. Select SP6016.
3. Replace the default settings with the alternate settings.
• In North America, enter 120 to replace the default settings with the alternate
settings. The bold settings in the table above are replaced with the italicized
settings.
• In Europe (or Asia), enter 7 to replace the default settings with the alternate
settings. The bold settings in the table above are replaced with the italicized
settings.
4. To restore all the default settings in either North America or Europe/Asia, enter
"0".
SP 5126
This SP controls the alternative paper sizes that are detected for LG SEF (USA) or
8 ½ x 13" (Europe/Asia).
11" x 15"
Exec LEF
8" x 10" SEF
Set by SP 5126
Europe/Asia
4
8 K
2
16 K SEF
1
16 K LEF
6-22
15 February 2006
DL SEF
LT SEF
LT LEF

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt-c2Mt-c3

Table of Contents