Ricoh MT-C1 Service Manual page 590

15 February 2006
5959* Paper Size (B140/B246 Series)
001 Tray 1
The following paper sizes can be set. If the A3 DLT kit is not installed, you can
only use settings 0 and 1.
0: A4
1: 8 x 11 (LT)
1/2
2:A3
3:B4
4:A4R (A4 SEF)
5:11 x 17
005 Tray 4 (LCT)
Tray 4 (LCT) accepts three paper sizes. Enter the correct number of the size of
the paper loaded in the LCT:
0: A4
1:8 x 11
1/2
2:B5
3:A4 R (A4 SEF)
006 Cover Sheet DFU
The Cover Interposer Tray B470 is provided with two arrays of paper size sensors
to detect the paper size. However, some of the paper sizes may not be indicated
correctly on the display panel. For more details, refer to the Cover Interposer Tray
manual section "Paper Size Detection".
5967 Copy Server: Set Function
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.[0~1/1]
0: ON
1: OFF
5974 Cherry Server
Selects which version of the Scan Router application program, "Light" or "Full
(Professional)", is installed.
[0 ~ 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
5985 Device Setting (B140/B246)
The NIC and USB support features are built into the GW controller. Use this SP
to enable and disable these features. In order to use the NIC and USB functions
built into the controller board, these SP codes must be set to "1".
001 On Board NIC
002 On Board USB
SERVICE PROGRAM MODE TABLES
6: 8 x 14 R (LG SEF)
1/2
7: 8 x 11 R (LT SEF)
1/2
8: B5
9: B5 R (B5 SEF)
10: Custom Size
4: 8 x 14 R (LG SEF)
1/2
5: B4 R (B4 SEF)
6: 8 x 14 R (LG SEF)
1/2
7: Custom Size
0: Disable 1: Enable
5-117