Deleting Virtual Chassis Ports In A Virtual Chassis Configuration - Juniper EX9200 Features Manual

Virtual Chassis Feature Guide for EX9200 Switches
Related
Documentation

Deleting Virtual Chassis Ports in a Virtual Chassis Configuration

42
configuration has the same effect as issuing the
command.
Guidelines for Configuring Virtual Chassis Ports
Configuring Interchassis Redundancy for MX Series 3D Universal Edge Routers Using a
Virtual Chassis
Configuring an EX9200 Virtual Chassis on page 32
Example: Configuring Interchassis Redundancy for MX Series 3D Universal Edge Routers
Using a Virtual Chassis
You can delete a Virtual Chassis port (
deleting a Virtual Chassis configuration. You can also delete a Virtual Chassis port when
you want to replace it with a Virtual Chassis port configured on a different FPC slot, PIC
slot, or port number in the router or switch. After you delete a Virtual Chassis port by
using the request virtual-chassis vc-port delete
to the global configuration and can again function as a standard network port.
NOTE: If you issue the
first installing an MX Virtual Chassis Redundancy Feature Pack license on
both member routers, the software displays a warning message that you are
operating without a valid Virtual Chassis software license.
A software license is not needed to create an EX9200 Virtual Chassis.
To remove the Virtual Chassis ports from both member devices in a Virtual Chassis:
In the console window on the router or switch configured as
1.
or more Virtual Chassis ports.
{master:member0-re0}
user@host1> request virtual-chassis vc-port delete fpc-slot fpc-slot-number pic-slot
pic-slot-number port port-number
For example, the following command deletes
FPC slot 2, PIC slot 2, and port 0) from
{master:member0-re0}
user@host1> request virtual-chassis vc-port delete fpc-slot 2 pic-slot 2 port 0
vc-port successfully deleted
In the console window on the router or switch configured as
2.
more Virtual Chassis ports.
) as part of the procedure for
vcp-slot/pic/port
command, the port becomes available
request virtual-chassis vc-port delete
vcp-2/2/0
member 0 in the Virtual Chassis.
Copyright © 2017, Juniper Networks, Inc.
commit synchronize force
command without
, remove one
member 0
(the Virtual Chassis port on
, remove one or
member 1