Targeted-Distribution (Static Interfaces Over Aggregated Ethernet) - Juniper EX9200 Features Manual

Virtual Chassis Feature Guide for EX9200 Switches

targeted-distribution (Static Interfaces over Aggregated Ethernet)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
100
targeted-distribution;
[edit interfaces demux0 unit logical-unit-number],
[edit interfaces pp0 unit logical-unit-number]
Statement introduced in Junos OS Release 11.2.
Statement introduced in Junos OS Release 13.2R2 for EX Series switches.
Configure egress data for a logical interface to be sent across a single member link in an
aggregated Ethernet bundle. A backup link is provisioned with CoS scheduling resources
in the event that the primary assigned link goes down. The aggregated Ethernet interface
must be configured without link protection.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
CoS for PPPoE Subscriber Interfaces Overview
Configuring the Distribution Type for PPPoE Subscribers on Aggregated Ethernet Interfaces
Verifying the Distribution of PPPoE Subscribers in an Aggregated Ethernet Interface
Targeted Traffic Distribution on Aggregated Ethernet Interfaces in a Virtual Chassis on
page 51
Configuring Module Redundancy for a Virtual Chassis on page 52
Configuring Chassis Redundancy for a Virtual Chassis
Copyright © 2017, Juniper Networks, Inc.