Juniper EX9200 Features Manual page 105

Default
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
A standalone EX Series switch is a Virtual Chassis by default. It has a default member ID
of 0, a default mastership priority of 128, and a default role as master.
A QFX Series device configured in standalone mode is a Virtual Chassis by default. It has
a default member ID of 0, a default mastership priority of 128, and a default role as master.
A standalone XRE200 External Routing Engine or EX8200 switch is not part of an EX8200
Virtual Chassis until a Virtual Chassis configuration is set up.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Autoprovisioning a Virtual Chassis Fabric
Preprovisioning a Virtual Chassis Fabric
Adding a Device to a Virtual Chassis Fabric
Configuring a QFX Series Virtual Chassis (CLI Procedure)
Configuring an EX4300 Virtual Chassis (CLI Procedure)
Configuring EX4600 Switches in a Mixed or Non-Mixed Virtual Chassis (CLI Procedure)
Configuring an EX9200 Virtual Chassis on page 32
Chapter 11: Configuration Statements
105