Verifying The Operation Of Virtual Chassis Ports - Juniper EX9200 Features Manual

Virtual chassis feature guide ex series
Hide thumbs Also See for EX9200:
Table of Contents

Advertisement

Related
Documentation

Verifying the Operation of Virtual Chassis Ports

Purpose
Action
Copyright © 2017, Juniper Networks, Inc.
{master:member1-re0}
user@host2> request virtual-chassis vc-port delete fpc-slot fpc-slot-number pic-slot
pic-slot-number port port-number
(Optional) Confirm that the Virtual Chassis ports have been deleted from each of the
3.
two member routers or switches.
When you delete a Virtual Chassis port, its name (
in the output of the
show virtual-chassis vc-port
output for the
show virtual-chassis vc-port
confirms that all Virtual Chassis ports have been deleted from both member devices.
For member 0 (
host1
):
{master:member0-re0}
user@host1> show virtual-chassis vc-port all-members
member0:
--------------------------------------------------------------------------
For member 1 (
):
host2
{backup:member1-re0}
user@host2> show virtual-chassis vc-port all-members
member1:
--------------------------------------------------------------------------
TIP:
Deleting and then re-creating a Virtual Chassis port configuration may
cause the Virtual Chassis port to appear as
the
show virtual-chassis vc-port
the FPC that hosts the re-created Virtual Chassis port.
Deleting a Virtual Chassis Configuration for MX Series 3D Universal Edge Routers
Configuring an EX9200 Virtual Chassis on page 32
Example: Deleting a Virtual Chassis Configuration for MX Series 3D Universal Edge Routers
Guidelines for Configuring Virtual Chassis Ports
Verify that the Virtual Chassis ports in an MX Series or EX9200 Virtual Chassis are properly
configured and operational.
To display the status of the Virtual Chassis ports for both member routers or switches
in the Virtual Chassis:
user@host> show virtual-chassis vc-port all-members
Chapter 3: Virtual Chassis Ports
vcp-slot/pic/port
command. For example, the following
command on each member router or switch
in the
Absent
command display. To resolve this issue, reboot
) no longer appears
column of
Status
43

Advertisement

Table of Contents
loading

Table of Contents