Juniper EX9200 Features Manual page 102

Virtual Chassis Feature Guide for EX9200 Switches
102
is overwritten. If you specify a maximum number of files, you also must specify a
maximum file size with the
Range: 2 through 1000
Default: 3 files
flag flag —Tracing operation to perform. To specify more than one tracing operation,
include multiple flag statements. You can include the following flags:
—All tracing operations.
all
TIP: The flag displays a subset of logs that are generally useful in
all
debugging issues, and for more detailed information, you can use options
all detail . However, to avoid significantly impacting VCF stability, use this
high level of tracing only for troubleshooting for a short period of time, and
not during normal VCF operation.
—Trace Virtual Chassis ports (VCPs) that have been automatically
auto-configuration
configured.
—Trace Virtual Chassis complete sequence number (CSN) packets.
csn
—Trace Virtual Chassis errored packets.
error
—Trace Virtual Chassis hello packets.
hello
—Trace Virtual Chassis KRT events.
krt
—Trace Virtual Chassis link-state packets.
lsp
lsp-generation —Trace Virtual Chassis link-state packet generation.
—Trace Virtual Chassis ME events.
me
normal —Trace normal events.
—Trace Virtual Chassis packets.
packets
parse —Trace reading of the configuration.
—Trace partial sequence number (PSN) packets.
psn
route —Trace Virtual Chassis routing information.
—Trace Virtual Chassis SPF events.
spf
state —Trace Virtual Chassis state transitions.
—Trace Virtual Chassis task operations.
task
—(Optional) Do not place a timestamp on any trace file.
no-stamp
no-world-readable —(Optional) Restrict file access to the user who created the file.
—(Optional) Trace received packets.
receive
replace —(Optional) Replace a trace file rather than appending information to it.
option.
size
Copyright © 2017, Juniper Networks, Inc.