Request Virtual-Chassis Member-Id Set - Juniper EX9200 Features Manual

Virtual chassis feature guide ex series
Hide thumbs Also See for EX9200:
Table of Contents

Advertisement

request virtual-chassis member-id set

Syntax
Syntax (MX960,
MX2010, and MX2020
Routers)
Release Information
Description
Options
Copyright © 2017, Juniper Networks, Inc.
request virtual-chassis member-id set member member-id
request virtual-chassis member-id set member member-id
<slots-per-chassis slot-count>
Command introduced in Junos OS Release 11.2.
Command introduced in Junos OS Release 13.2R2 for EX Series switches.
option added in Junos OS Release 15.1 for MX960 routers, MX2010
slots-per-chassis
routers, and MX2020 routers.
Assign (
) a member ID and, optionally, a slot count to a router or switch that you want
set
to add as a member of a Virtual Chassis configuration.
NOTE:
Issuing the
the device to reboot, and requires you to confirm that you want to proceed
with this operation. If you do not confirm the operation, the software cancels
the command. After the reboot all MPCs remain powered off until the Virtual
Chassis port connection is configured.
—Assign the numeric value that identifies a member router or switch
member member-id
in a Virtual Chassis configuration. When you assign a member ID to a router or switch,
assign the same member ID defined for this device in the preprovisioned configuration.
Replace
member-id
with the value 0 or 1.
slots-per-chassis slot-count
the number of chassis slots in the Virtual Chassis member router. To ensure that a
Virtual Chassis consisting of an MX2020 member router and either an MX960 or
MX2010 member router forms properly, you must explicitly set the slot-count value
for the MX960 router or MX2010 router to 20 to match the slot count of the MX2020
router.
Values:
The valid values for
slot-count
MX960 router: 12 or 20
MX2010 router: 12 or 20
MX2020 router: 20
Default:
The default values for
MX960 router: 12
Chapter 12: Operational Commands: Administrative
request virtual-chassis member-id set
—(MX960, MX2010, and MX2020 routers) (Optional) Identify
are as follows:
are as follows:
slot-count
command causes
109

Advertisement

Table of Contents
loading

Table of Contents