Preprovisioned - Juniper EX9200 Features Manual

Virtual Chassis Feature Guide for EX9200 Switches

preprovisioned

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
96

preprovisioned;

[edit virtual-chassis]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 13.2X50-D15 for the QFX Series.
Statement introduced in Junos OS Release 13.2X51-D20 for Virtual Chassis Fabric (VCF).
Enable the preprovisioned configuration mode for a Virtual Chassis or Virtual Chassis
Fabric (VCF) configuration.
When the preprovisioned configuration mode is enabled, you cannot use the CLI or the
J-Web interface to change the mastership priority or member ID of member switches.
You must use this statement to configure an EX8200 Virtual Chassis. Nonprovisioned
configuration of an EX8200 Virtual Chassis is not supported.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Preprovisioning a Virtual Chassis Fabric
Example: Configuring an EX4200 Virtual Chassis Using a Preprovisioned Configuration
File
Example: Setting Up a Full Mesh EX8200 Virtual Chassis with Two EX8200 Switches
and Redundant XRE200 External Routing Engines
Configuring an EX4200, EX4500, or EX4550 Virtual Chassis (CLI Procedure)
Configuring an EX8200 Virtual Chassis (CLI Procedure)
Configuring an EX9200 Virtual Chassis on page 32
Configuring a QFX Series Virtual Chassis (CLI Procedure)
Replacing a Member Switch of a Virtual Chassis Configuration (CLI Procedure)
Copyright © 2017, Juniper Networks, Inc.