Member - Juniper EX9200 Features Manual

Virtual Chassis Feature Guide for EX9200 Switches

member

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
94
member member-id {
fabric-tree-root;
location location;
mastership-priority number;
no-management-vlan;
serial-number serial-number;
role role;
}
[edit virtual-chassis]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 13.2X50-D15 for the QFX Series.
Statement introduced in Junos OS Release 13.2X51-D20 for Virtual Chassis Fabric (VCF).
Configure a switch or an XRE200 External Routing Engine as a member of a Virtual
Chassis or a Virtual Chassis Fabric (VCF) with characteristics specified by the available
options.
When an EX Series switch or a QFX Series devices configured in standalone mode is
powered on but not interconnected through its Virtual Chassis ports (VCPs) with other
member switches, its default member ID is
There is no default member ID in an EX8200 or EX9200 Virtual Chassis. An EX8200 or
EX9200 Virtual Chassis must be preprovisioned, and that process configures the member
IDs.
—Identifies a specific member switch of a Virtual Chassis or VCF configuration.
member-id
The exact range for a specific Virtual Chassis or VCF depends on the number of switches
allowed in the Virtual Chassis or VCF.
In an EX8200 Virtual Chassis, member IDs 0 through 7 are reserved for EX8200 member
switches and member IDs 8 and 9 are reserved for the master and backup external
Routing Engines.
The remaining statement options set characteristics of the Virtual Chassis or VCF member,
and are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Autoprovisioning a Virtual Chassis Fabric
Preprovisioning a Virtual Chassis Fabric
0 .
Copyright © 2017, Juniper Networks, Inc.