Configuring The Ex9200 Virtual Chassis - Juniper EX9200 Features Manual

Configuring the EX9200 Virtual Chassis

Copyright © 2017, Juniper Networks, Inc.
We recommend that you configure these groups before you configure your Virtual Chassis,
to ensure that your configuration is always identical on all Routing Engines in the Virtual
Chassis.
For information on creating and applying configuration groups for your EX9200 Virtual
Chassis, see "Creating and Applying Configuration Groups for a Virtual Chassis" on page
To configure an EX9200 Virtual Chassis:
Before you perform this procedure:
Ensure that both EX9200 member switches in the Virtual Chassis have dual Routing
Engines installed.
Ensure all Routing Engines on both member switches are running the same version of
Junos OS Release 13.2R2 or later.
Cable the Virtual Chassis member switches together. See Connecting a Fiber-Optic
Cable, Installing and Removing EX9204 Switch Hardware Components, Installing and
Removing EX9208 Switch Hardware Components, or Installing and Removing EX9214
Switch Hardware Components.
Create and configure the configuration groups, as described in
Groups for an EX9200 Virtual Chassis" on page
Log onto the switch that you want to assign as member 0 in your Virtual Chassis.
1.
Specify the preprovisioned configuration mode:
2.
[edit virtual-chassis]
user@switch-0# set preprovisioned
You must use preprovisioned configuration mode to configure an EX9200 Virtual
Chassis.
Configure the Virtual Chassis by including both member switches in the Virtual Chassis
3.
configuration:
[edit virtual-chassis]
user@switch-0# set member 0 serial-number serial-number role routing-engine
user@switch-0# set member 1 serial-number serial-number role routing-engine
where serial-number is the chassis serial number of the member switch. You can
retrieve the chassis serial number in the show chassis hardware command output or
by physically viewing the serial number label on the switch. See Locating the Serial
Number on an EX9204 Switch or Component, Locating the Serial Number on an EX9208
Switch or Component, or Locating the Serial Number on an EX9214 Switch or Component
for additional information
An EX9200 Virtual Chassis supports two member switches. Both switches should be
assigned the
routing-engine
Chapter 2: Accessing and Configuring a Virtual Chassis and Managing Files
32.
role.
36.
"Creating Configuration
33