Juniper EX9200 Features Manual page 50

Virtual Chassis Feature Guide for EX9200 Switches
Related
Documentation
50
In the console window on the router or switch configured as
2.
ID .
1
{master:member1-re0}
request virtual-chassis member-id delete
user@host2>
This command will disable virtual-chassis mode and reboot the system.
Continue? [yes,no] (no) yes
Updating VC configuration and rebooting system, please wait...
{master:member1-re0}
user@host2>
*** FINAL System shutdown message from root@host2 ***
System going down IMMEDIATELY
(Optional) Confirm that Virtual Chassis mode has been disabled on both member
3.
routers or switches.
For example:
user@host1> show virtual-chassis status
error: the virtual-chassis-control subsystem is not running
Deleting a Virtual Chassis Configuration for MX Series 3D Universal Edge Routers
Configuring an EX9200 Virtual Chassis on page 32
Example: Deleting a Virtual Chassis Configuration for MX Series 3D Universal Edge Routers
, delete member
member 1
Copyright © 2017, Juniper Networks, Inc.