Linear Encoder Manufactured By Renishaw Inc. (Incremental Type) - Mitsubishi Electric MR-J3-B-RJ006 Instruction Manual

3. LOAD SIDE ENCODER

3.2.4 Linear encoder manufactured by Renishaw Inc. (Incremental type)

(1) Specifications
Item
Model
System
Effective measurement length
Resolution
Accuracy (20 (68) [ ( )]
Supply power voltage
Current consumption
Rated response speed (Note 1)
Maximum response speed
Operating temperature range
Operating humidity range
Storage temperature range
Dust tightness water tightness
Vibration resistance
Shock resistance
Output signal
Output cable
Load side encoder cable
Note. 1. Use at the rated speed or less.
2. A home position return cannot be made if there is no linear encoder home position (reference mark).
(2) Linear encoder unit structure
Always set an linear encoder home position (reference mark).
RGH26P
5 m
3 m/m (when compensation is made between two points)
4.0m/s
5.0m/s
(Z-phase data included, serial communication of reference mark data is also is made) (Note 3)
N-15 PIN Dtype Dtype plug (0.5m) manufactured by Renishaw Inc.
Refer to (4) in this section and fabricate the cable.
RENISHAW RGH26
Increasing direction
3 - 24
Specifications
RGH26Q
Optical system
Maximum length 70000mm
1 m
5V 5%
Max.230mA
3.2m/s
4.0m/s
0 to 50 (32 to 131 ) (non-freezing)
10 to 90%RH (non-condensing)
20 to 70 ( 4 to 158 ) (non-freezing)
IP50
2
100m/s (55 to 2000H
2
1000m/s (1/2sin, 11ms)
Serial communication compatibility
Decreasing direction
RGH26R
0.5 m
1.6m/s
2.0m/s
)
Z