Linear Encoder Manufactured By Heidenhain Corporation - Mitsubishi Electric MR-J3-B-RJ006 Instruction Manual

3. LOAD SIDE ENCODER

3.2.2 Linear encoder manufactured by Heidenhain Corporation

(1) Specifications
(a) Absolute type
Item
Model
System
Effective measurement length
Resolution
Accuracy grade (20 (68) [
Supply power voltage
Current consumption
Rated response speed
Maximum response speed
Operating temperature range
Storage temperature range
Dust tightness water tightness
Vibration resistance
Shock resistance
Required feeding force
Output signal
Output cable
Load side encoder cable
POINT
When the absolute position system is configured, the MR-J3BAT battery is
not required.
LC491M
70 to 2040mm
( )])
3 m (up to effective measurement length 1240)
IP53 (when mounted according to the manual of the linear encoder
5N or less
Use the connection cable manufactured by Heidenhain Corporation.
Specifications
Photoelectric scanning system
0.05 m
5 m
5V 5% on the linear encoder side
Max.300mA
2.0m/s
2.0m/s
0 to 50 (32 to 122 ) (non-freezing)
20 to 70 ( 4 to 158 ) (non-freezing)
manufactured by Heidenhain Corporation)
IP64 (when filled with compressed air)
2
100m/s (DINIEC 68-2-6) without mounting spur
2
150m/s (DINIEC 68-2-6) with mounting spur
2
150m/s (DINIEC 68-2-6) (11ms)
Serial communication compatibility
337439- (17 pin coupling), 573661-
When fabricating, refer to (4) in this section.
3 - 11
LC192M
140 to 4240mm
5 m
3 m (up to effective measurement length 3040)
3.0m/s
3.0m/s
4N or less
(10 pins)