Mitsubishi Electric MR-J3-B-RJ006 Instruction Manual page 13

(5) Options and auxiliary equipment
Use UL/C-UL standard-compliant products.
(6) Attachment of a servo motor
For the flange size of the machine side where the servo motor is installed, refer to "CONFORMANCE WITH
UL/C-UL STANDARD" in the Servo Motor Instruction Manual (Vol.2).
(7) About wiring protection
For installation in United States, branch circuit protection must be provided, in accordance with the National
Electrical Code and any applicable local codes.
For installation in Canada, branch circuit protection must be provided, in accordance with the Canada
Electrical Code and any applicable provincial codes.
<<About the manuals>>
This Instruction Manual and the following Servo Amplifier/Servo Motor Instruction Manuals are required if
you use the General-Purpose AC servo MR-J3- B for the first time. Always purchase them and use the
MR-J3- B safely.
Relevant manuals
MELSERVO-J3 Series MR-J3- B Servo Amplifier Instruction Manual
MELSERVO-J3 Series Instructions and Cautions for Safe Use of AC Servos
MELSERVO Servo Motor Instruction Manual Vol.2
EMC Installation Guidelines
<<About the wires used for wiring>>
Wiring wires mentioned in this instruction manual are selected based on the ambient temperature of 40°C
(104 ).
Manual name
A - 12
Manual No.
SH(NA)030051
IB(NA)0300077
SH(NA)030041
IB(NA)67310