Ip Domain-Name - Cisco MDS 9000 series Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip domain-name

To configure a domain name, use the ip domain-name command in configuration mode. To delete a
domain name, use the no form of the command.
Syntax Description
domain-name
Defaults None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example configures a domain name.
switch# config terminal
switch(config)# ip domain-name MyDomain
Related Commands Command
show ip route
OL-8413-07, Cisco MDS SAN-OS Release 3.x
ip domain-name domain-name
no ip domain-name domain-name
Specifies the domain name.
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Cisco MDS 9000 Family Command Reference
ip domain-name
11-51