Show Fabric-Binding - Cisco MDS 9000 series Command Reference Manual

show fabric-binding

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fabric-binding
To display configured fabric binding information, use the show fabric-binding command in EXEC
mode.
Syntax Description
database
active
vsan vsan-id
efmd statistics
statistics
status
violations
last number
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(1)
Usage Guidelines None.
Examples The following example displays configured fabric binding database information.
switch# show fabric-binding database
--------------------------------------------------
Vsan
--------------------------------------------------
1
1
1
4
4
61
61
[Total 7 entries]
Cisco MDS 9000 Family Command Reference
22-60
show fabric-binding {database [active] [vsan vsan-id] | efmd statistics [vsan vsan-id] |
statistics [vsan vsan-id] | status [vsan vsan-id] | violations [last number]}
Displays configured database information.
Displays the active database configuration information.
Specifies the FICON-enabled VSAN ID. The range is 1 to 4093.
Displays Exchange Fabric Membership Data (EFMD) statistics.
Displays fabric binding statistics.
Displays fabric binding status.
Displays violations in the fabric binding configuration.
Specifies recent violations. The range is 1 to 100.
Modification
This command was introduced.
Logging-in Switch WWN
21:00:05:30:23:11:11:11
21:00:05:30:23:1a:11:03
20:00:00:05:30:00:2a:1e
21:00:05:30:23:11:11:11
21:00:05:30:23:1a:11:03
21:00:05:30:23:1a:11:03
21:00:05:30:23:11:11:11
Domain-id
0x66(102)
0x19(25)
0xea(234)
0x66(102)
0x19(25)
0x19(25)
0x66(102)
Chapter 22 Show Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x