Member (Fcalias Configuration Submode) - Cisco MDS 9000 series Command Reference Manual

member (fcalias configuration submode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
member (fcalias configuration submode)
To add a member name to an Fibre Channel alias on a VSAN, use the member command in fcalias
configuration submode. To remove a member name from an FC alias, use the no form of the command.
Syntax Description
device-alias aliasname
lun lun-id
domain-id domain-id
fcid fc-id
fwwn fwwn-id
interface fc slot/port
swwn swwn-id
ip-address ipv4|ipv6
pwwn pwwn-id
symbolic-nodename
nodename
Defaults None.
Command Modes Fcalias configuration submode.
Cisco MDS 9000 Family Command Reference
15-6
member {device-alias aliasname [lun lun-id] |
domain-id domain-id [lun lun-id] |
fcid fc-id [lun lun-id] |
fwwn fwwn-id |
interface fc slot/port [domain-id domain-id | swwn swwn-id] |
ip-address ipv4|ipv6 |
pwwn pwwn-id [lun lun-id] |
symbolic-nodename nodename}
no member {device-alias aliasname [lun lun-id] |
domain-id domain-id [lun lun-id] |
fcid fc-id [lun lun-id] |
fwwn fwwn-id |
interface fc slot/port [domain-id domain-id | swwn swwn-id] |
ip-address ipv4|ipv6 |
pwwn pwwn-id [lun lun-id] |
symbolic-nodename nodename}
Specifies the member device alias. Maximum length is 64 characters.
Specifies the member LUN ID. The format is 0xhhhh[:hhhh[:hhhh[:hhhh]]],
where h is a hexadecimal digit.
Specifies the member domain ID. The range is 1 to 239.
Specifies the member FC ID. The format is 0xhhhhhh, where h is a
hexadecimal digit.
Specifies the member fWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal digit.
Specifies the member interface ID.
Specifies the member sWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal digit.
Specifies a member IP address in either IPv4 format, A.B.C.D, or
IPv6format, X:X:X::X/n.
Specifies the member pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal digit.
Specifies the member symbolic node name. The maximum length is
255 characters.
Chapter 15 M Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x