System Health Cf-Re-Flash - Cisco MDS 9000 series Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

system health cf-re-flash

To update the CompactFlash firmware on demand, use the system health cf-re-flash command in EXEC
mode.
Syntax Description module slot
Defaults
Enabled to automatically run in the background every 30 days.
Command Modes
EXEC mode.
Command History Release
3.1(3)
Usage Guidelines
The CRC checksum test and the firmware update can be enabled on the following modules:
•
•
•
•
•
•
Examples The following example shows how to update firmware on demand.
switch# system health cf-re-flash module 4
Related Commands Command
show system health
show system health
statistics
OL-8413-07, Cisco MDS SAN-OS Release 3.x
system health cf-re-flash module slot
Modification
This command was introduced.
DS-X9016
DS-X9032
DS-X9302-14K9
DS-X9308-SMIP
DS-X9304-SMIP
DS-X9530-SF1-K9
Description
Displays system health information.
Displays system health statistics.
Specifies the module slot number.
system health cf-re-flash
Cisco MDS 9000 Family Command Reference
21-87