Cisco MDS 9000 series Command Reference Manual page 455

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Defaults Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays the system output when the debug zone all command is issued:
switch# debug zone all
2005 Mar 10 01:46:36 zone: Src: 0x00000601/18
276 [REQ] Opc: 182 (MTS_OPC_DEBUG_WRAP_MSG) RR: 0x0067D5CD
0x24E95060E0EF4
2005 Mar 10 01:46:36 zone: 01 00 00 00 E8 03 00 00 00 00 00 00 00 00 00 00
2005 Mar 10 01:46:36 zone: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2005 Mar 10 01:46:36 zone: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2005 Mar 10 01:46:36 zone: FF FF FF FF 2F 64 65 76 2F 70 74 73 2F 30 00 00
2005 Mar 10 01:46:36 zone: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2005 Mar 10 01:46:36 zone: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
.
Related Commands Command
no debug all
show zone
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Modification
This command was introduced.
REJ:0 SYNC:0
Description
Disables all debugging.
Displays zone information.
Dst: 0x00000601/94 ID: 0x0067D5CD
HA_SEQNO: 0x00000000
Cisco MDS 9000 Family Command Reference
debug zone
Size:
TS:
6-135