Show Dpvm - Cisco MDS 9000 series Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show dpvm

To display dynamic port VSAN membership (DPVM) information, use the show dpvm command.
Syntax Description
database
active
pending
pending-diff
ports
vsan vsan-id
status
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example shows how to display DPVM database information.
switch# show dpvm database
pwwn 00:00:00:00:00:00:00:01 vsan 1
pwwn 00:00:00:00:00:00:00:02 vsan 1
[Total 2 entries]
Related Commands Command
dpvm database
OL-8413-07, Cisco MDS SAN-OS Release 3.x
show dpvm {database [active] | pending | pending-diff | ports [vsan vsan-id] | status}
Displays both the configured and active DPVM databases.
Displays only the active DPVM database.
Displays pending DPVM operations.
Displays differences between the pending DPVM operations and the active
DPVM database.
Displays DPVM information for the ports.
Specifies a VSAN ID. The range is from 0 to 4093.
Displays DPVM status information.
Modification
This command was introduced.
Description
Configures the DPVM database.
Cisco MDS 9000 Family Command Reference
show dpvm
22-57