Ip Default-Network - Cisco MDS 9000 series Command Reference Manual

ip default-network

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ip default-network
To configure the IP address of the default network, use the ip default-network command in
configuration mode. To disable the IP address of the default network, use the no form of the command.
Syntax Description
ip-address
Defaults None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following examples configures the IP address of the default network to 1.1.1.4.
switch# config terminal
switch(config)# ip default-network 1.1.1.4
switch(config)# ip default-gateway 1.1.1.4
Related Commands Command
show ip route
Cisco MDS 9000 Family Command Reference
11-48
ip default-network ip-address
no ip default-network ip-address
Specifies the IP address of the default network.
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Chapter 11 I Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x