Scsi-Flow Distribute - Cisco MDS 9000 series Command Reference Manual

scsi-flow distribute

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
scsi-flow distribute
To enable SCSI flow distribution through CFS, use the scsi-flow distribute command. To disable the
SCSI flow distribution, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
SCSI flow distribution is enabled.
Command Modes Configuration mode.
Command History Release
2.0(2)
Usage Guidelines
You must enable the SCSI flow feature on the Storage Services Module (SSM) before you can configure
a SCSI flow. Use the ssm enable feature module slot-number command to enable the SCSI flow feature
on the SSM.
Examples
The following example enables distribution of SCSI flow services using CFS.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# scsi-flow distribute
The following example disables distribution of SCSI flow services.
switch(config)# no scsi-flow distribute
Related Commands Command
ssm enable feature
show santap module
Cisco MDS 9000 Family Command Reference
21-8
scsi-flow distribute
no scsi-flow distribute
Modification
This command was introduced.
Description
Enables the SCSI flow feature on the SSM.
Displays SCSI flow configuration and status.
End with CNTL/Z.
OL-8413-07, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands