Debug Fcdomain - Cisco MDS 9000 series Command Reference Manual

debug fcdomain

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug fcdomain
To enable debugging for the fcdomain feature, use the debug fcdomain command in EXEC mode.To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description all
critical
error
fc
fcip
port-channel
pkt
pkthdr
both
rx
interface type number
vsan vsan-id
tx
memory
notify
phase
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Cisco MDS 9000 Family Command Reference
6-38
debug fcdomain {all | critical | error |
fc {pkt | pkthdr} {both | rx | tx} [interface type number [vsan vsan-id] | vsan vsan-id] |
ipc {pkt | pkthdr} {both | rx [node range | opcode range | sap range] | tx} |
memory | notify | phase}
no debug fcdomain {all | critical | error |
fc {pkt | pkthdr} {both | rx | tx} [interface type number [vsan vsan-id] | vsan vsan-id] |
ipc {pkt | pkthdr} {both | rx [node range | opcode range | sap range] | tx} |
memory | notify | phase}
Modification
This command was introduced.
Enables debugging of all fcdomain parameters.
Enables debugging of critical operations.
Enables debugging of error operation.
Enables debugging of Fibre Channel packets and headers.
Enables debugging of Fibre Channel IP packets and headers.
Enables debugging of PortChannel packets and headers.
Enables debugging of packets.
Enables debugging of headers.
Enables debugging in both the transmit and receive directions.
Enables debugging in the receive direction.
Specifies the interface to be debugged.
Restricts debugging to the specified VSAN.
Enables debugging in the transmit direction,
Enables debugging of memory operations.
Enables debugging of notifications
Enables debugging of global phases
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x