Clear Counters (San Extension N Port Configuration Mode) - Cisco MDS 9000 series Command Reference Manual

clear counters (SAN extension N port configuration mode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear counters (SAN extension N port configuration mode)
To clear SAN extension tuner N port counters, use the clear counters command.
Syntax Description
This command has no other arguments or keywords.
Defaults None.
Command Modes SAN extension N port configuration submode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples The following example shows how to clear SAN extension tuner N port counters.
switch# san-ext-tuner
switch(san-ext)# nWWN 10:00:00:00:00:00:00:00
switch(san-ext)# nport pwwn 12:00:00:00:00:00:00:56 vsan 13 interface gigabitethernet
1/2
switch(san-ext-nport)# clear counters
Related Commands Command
show san-ext-tuner
Cisco MDS 9000 Family Command Reference
4-32
clear counters
Modification
This command was introduced.
Description
Displays SAN extension tuner information.
Chapter 4 C Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x