Inspection And Maintenance Reports - Buderus Logano GE315 Installation And Maintenance Instructions Manual

6.7

Inspection and maintenance reports

The inspection and maintenance reports provide an
overview of the required inspection and maintenance
work.
Complete the reports during inspection and
maintenance.
Sign all inspection work as completed and enter the
relevant date.
Inspection work
1. Check the general system condition
2. Check the system visually and for function
3. Check the fuel and water components of the system for:
– leaks
– visible signs of corrosion
– signs of ageing
Check the combustion chamber and the heating surface
4.
for contamination; shut-down the system for this step
5. Check the burner function
6. Check the flue gas routing for function and safety
Check the water pressure and inlet pressure of the
7.
diaphragm expansion vessel in sealed systems
Check the water pressure and the inlet pressure in open
8.
systems
Check the function of the DHW cylinder and that of the
9.
corrosion protection anode
10. Check the control device settings
Final check of the inspection work; document the
11.
measurement and test results
Confirm the professional inspection with signature, date and company stamp
Logano GE315 - We reserve the right to make any changes due to technical modifications
Page
(individual steps)
page 39
See burner documentation
See burner documentation
page 45
page 45
See DHW cylinder
documentation
See control device
documentation
Maintenance
Comments
6
47