Manufacture Date; Powered Hours; Power-On Resets - Siemens Sitrans LR200 Instruction Manual

4.5.7. Maintenance Status
Indicates which level of maintenance reminder is active.
In SIMATIC PDM, open the menu View – Device Status, click on the
Maintenance tab and check the Calibration Schedule Status window.
4.5.8. Acknowledge Status
Indicates which level of maintenance reminder has been acknowledged.
In SIMATIC PDM, open the menu View – Device Status, click on the
Maintenance tab and check the Calibration Schedule Status window.
4.5.9. Acknowledge
Acknowledges the current maintenance reminder.
To acknowledge a reminder via SIMATIC PDM:
a) Open the menu View – Device Status and click on the tab Maintenance.
b) In the Device Lifetime section, click on Acknowledge Warnings.
To acknowledge a reminder via the handheld programmer:
a) Press RIGHT arrow
Mode.
b) Press RIGHT arrow

4.6. Manufacture Date

The date of manufacture of the SITRANS LR200 (yy mm dd).

4.7. Powered Hours

Displays the number of hours the unit has been powered up since manufacture.
In SIMATIC PDM, open the menu View – Wear.

4.8. Power-on Resets

The number of power cycles that have occurred since manufacture.
In SIMATIC PDM, open the menu View – Wear.
7ML19985JP02 SITRANS LR200 (HART) – INSTRUCTION MANUAL
twice to open parameter view and activate Edit
to acknowledge the reminder.
Page 107