Set Up The Date; Set Up The Time - Siemens ACCESS 9340 Reference Manual

PMCM-9340D-0208
2/2008

Set Up the Date

###:
1. Press until DATE is visible.
2. Press DATE.
3. Enter the MONTH number.
4. Press OK.
5. Enter the DAY number.
6. Press OK.
7. Enter the YEAR number.
8. Press OK.
9. Select how the date is displayed: M/D/Y,
Y/M/D, or D/M/Y).
1;
10. Press to return to the SETUP MODE
screen.
11. To verify the new settings, press MAINT >
DIAGN > CLOCK.
NOTE:

Set Up the Time

###:
1. Press until TIME is visible.
2. Press TIME.
3. Enter the HOUR.
4. Press OK.
5. Enter the MIN (minutes).
6. Press OK.
7. Enter the SEC (seconds).
8. Press OK.
9. Select how the time is displayed: 24H or
AM/PM.
1;
10. Press to return to the SETUP MODE
screen.
11. To verify the new settings, press MAINT >
DIAGN > CLOCK.
NOTE:
© 2008 Siemens Energy & Automation, Inc. All Rights Reserved.
ACCESS 9340 and 9360 Meters
Chapter 3—Operation





  




  










EN–19