Navigate to Configure/Setup > Setup > Signal Processing and click on TVT. Click on one of the
two tabs to access the parameters listed.
TVT Setup [see
•
Auto False Echo Suppression Range
•
Auto False Echo Suppression
•
Hover Level
•
Shaper Mode
TVT Shaper
•
Shaper breakpoints 1 to 40. (Turn TVT Setup/Shaper Mode on to activate.)
Manual TVT Curve
Displays the effects of the TVT shaper modifications. Navigate to Configure/Setup > Setup >
Signal Processing and click on Manual TVT Curve.
Echo Profile
•
Navigate to Configure/Setup > Setup > Signal Processing and click on Echo
Profile.
•
Select Standard operation for faster display.
Local Display
Navigate to Configure/Setup > Setup > Local Display for access to:
•
Language
•
LCD Fast Mode [see LCD Fast Mode (4.9.) on page 108]
•
LCD Contrast [see LCD Contrast (4.10.) on page 108]
Maintenance and Diagnostics
Navigate to Maintenance and Diagnostics for access to:
Remaining Device Lifetime [see
•
Lifetime expected
•
Remaining Lifetime
•
Time in Operation
•
Activation of Reminders
•
Reminder 1 before Lifetime (Required)
•
Reminder 2 before Lifetime (Demanded)
Remaining Sensor Lifetime [see
•
Lifetime expected
•
Remaining Lifetime
•
Time in Operation
•
Activation of Reminders
•
Reminder 1 before Lifetime (Required)
•
Reminder 2 before Lifetime (Demanded)
7ML19985JP02
Auto False Echo Suppression (2.8.7.1.)
SITRANS LR200 (HART) – INSTRUCTION MANUAL
on page 90]
Remaining Device Lifetime (4.2.)
Remaining Sensor Lifetime (4.3.)
on page 95]
on page 98]
Page 65