Sliding Waveguide Configuration - Siemens Sitrans LR200 Instruction Manual

Sliding Waveguide Configuration

Notes:
• Always clamp the instrument in the same position for operation.
• For other flange dimensions and bolt hole sizing see
page 161.
• Maximum pressure 0.5 bar at 60° C (140° F) for sliding flange option.
• Process temperature and pressure capabilities are dependent upon information on the
process device tag. Reference drawing listed on the tag is available on the product page
of our website at: www.siemens.com/LR200, under More Info/Installation drawings/Level
Measurement/Installation Drawings/LR200.
• Additional information on process connections is available on the Installation Drawings
page under Process Connection Diagrams.
locking ring
process device tag
sliding flange
Flat-Face Flange
(See
on page
Dimensions
Page 156 SITRANS LR200 (HART) – INSTRUCTION MANUAL
nameplate
161
)
Flat-Face Flange Dimensions
187 mm
40 mm (1.6")
1000 mm
131.0 mm
100 mm
(4")
150 mm
(6")
200 mm
(8")
on
(7.4")
sensor reference
point
(40.8")
(5. 1 6")
225.8 mm
(8.89")
325.1 mm
(12.8")
7ML19985JP02