Date/Time; Configuration Via User Interface - Siemens SICAM Q100 7KG95 Series Manual

Basic Functions

2.2 Date/Time

2.2 Date/Time

Configuration via User Interface

2.2.1
Setting Date/Time
To change the date/time settings in the Configuration tab, proceed as follows:
•
In the navigation window, click Date and time.
[sc_preset_date_time, 4, en_US]
Figure 2-7
•
You can either get the date and time from the connected computer or adjust it manually.
Getting the PC Date and Time
•
Click Get PC date and time.
The computer time is displayed in the fields of the window and applied in the device.
Setting the Date and Time Manually (24-hour format)
•
Enter the desired time into the fields Day (format dd), Month (format mm), Year (format yyyy), Hour
(format hh), and Minute (format mm).
•
Click Set Date and time.
The time you have entered is displayed in the fields of the window and applied in the device.
The Action was successful indication is displayed on the status bar.
32
Configuration Tab, Date and Time
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021