Siemens Sitrans LR200 Instruction Manual page 182

Firm- PDM
ware EDD
Rev. Rev.
1.04 2.00
(cont' d ) (cont' d )
1.05
3.02 3.02.01
4.01.00 4.01.02
4.02.00 4.02.00
Page 174 SITRANS LR200 (HART) – INSTRUCTION MANUAL
Date
• HART commands 170 and 171 modified to read
27 May 2004
and write P713.
• Configuration status now being set for all
required commands.
• HART common practice and universal
commands now return response codes.
• When the full configuration is transferred to a
unit, Span is reset to the default value.
• HART command 225 now sets the manual Span
flag when P007 is set.
• Added new HART command 229 to provide a
write for P799.
• Corrected issue: P210 and P211 values (or
10 Aug 2004
HART values for URV/LRV) were not being
preserved over a power cycle if operation was
set to distance or volume.
• Resolved issue that could cause peak to be
27 Feb 2006
selected below the TVT curve.
• MP&F parameters added to device.
• Fault system upgraded to use S# codes to
match PROFIBUS products.
• Increased number of level/volume breakpoints
to 32.
• Improved linearity over ambient temperature.
NOTE: Software revision 3.02 is not backwards
compatible due to hardware compatibility.
22 Feb 2008 • New Local User Interface
• AMS EDD Rev. 1.01.01
15 Dec 2008
• Support NAMUR NE 43.
• Harmonization of menu structures and
parameter names across products.
• Display indicates progress towards first
measurement.
Changes (cont' d )
7ML19985JP02