Siemens Sitrans LR200 Instruction Manual page 50

4) In Step 4 – Ranges
a) Enter parameter values.
b) Click on Linearization.
c) In the Linearization window click on the appropriate Breakpoint tab to open the
dialog window.
d) Enter the desired level and associated volume values
Note: The Reset button resets values to the values in the offline table.
e) In the Step 4 window, click on NEXT.
1)
For display purposes we recommend entering values in ascending order (that is, the low-
est values in level 1 and volume 1).
Page 42 SITRANS LR200 (HART) – INSTRUCTION MANUAL
Linearization
Breakpoints 1 - 8
1)
, and click on OK.
7ML19985JP02